Allen Amplification does not export any of its products (except to Canada) at this time.
We can't provide the 50hz transformers required and are not able to provide the local support so often requested.
Our amps cannot be operated with step-down transformers due to the 50hz which will overheat them.
Thank you and best wishes.
35W w/6L6s and 5AR4. Optional 22W w/6V6s and 5U4G.
(1) 5AR4, (2) 6L6s and (5) 12AX7s (or 5U4G with 2 6V6s).
AB push-pull with adjustable fixed bias.
Bass, Treble and Midrange controls, BRIGHT switch and RAW control.
All-tube, long 3-spring medium-delay tank in a heavy vinyl reverb bag with MIX and TONE controls, shielded cables.
Post-driver using dual potentiometer and (4) coupling capacitors.
Stainless-steel angled-front chassis with welded corners.
Full-size (15/16") chassis-mount with 3/8" bushing, solid metal shaft, damped action.
Hand-wired point-to-point with tinned solid-core PVC wiring, G-10 glass epoxy circuit board with brass eyelets. Carbon film resistors, Mallory M150 and CDM silver mica tone capacitors, Switchcraft jacks, Carling switches, and U.S. made molded type sockets.
Cool and quiet running Allen TP40 200ma power transformer, TO35MT paper bobbin interleaved winding output transformer, TR reverb transformer and TRCH choke are all U.S. made. Optional TO40MT upgrade output transformer for more clean bottom end performance. See TRANSFORMERS Page for details.
Design is loosely based on the mid 60s Fender Vibrolux Reverb but without a normal channel. Design is enhanced with 2-knob reverb, non-opticoupler tube tremolo, master volume control, middle control, RAW control, rear-panel bias measurment jacks, impedance switch, and front-panel power switches.
Finger-jointed pine cabinet with black Tolex covering and Black/White/Silver sparkle or black grill cloth. Optional Blond/Wheat, Blond/Oxblood, Brown/Wheat and Tweed/Oxblood coverings available. 1/2" birch plywood floating-type baffleboard and (2) screw-on rear panels. Chrome bottom corners, rubber-cushioned chrome glides (feet), chrome chassis straps, black-rubber steel-reinforced carrying handle with chrome caps/screws. Leather handle also available.
(1) 12" Red, White and Blues, (2) 10" Copperheads or (1) 15" Legend 151 standard. Or pick your favorite Eminence Patriot or Redcoat speaker.
Brown-era tube tremolo, impedance switch, unique RAW mid/gain boost control, front-panel power switches, master volume, and conveninent rear-panel bias measurment jacks.
Black, 12-foot, 3-prong grounded heavy-duty 18/3 with strain relief bushing.
Front-panel mounted POWER and STANDBY toggle switches for easy access.
Front panel pilot-light for AC power with choice of red, green, blue, amber, or purple jeweled lens and #47 bulb.
Size and Weight
1x12 Combo - 24"W x 18"H x 10"D, 46 lbs.
2x10 Combo - 24"W x 18"H x 10"D, 50 lbs.
1x15 Combo - 24"W x 20"H x 10"D, 58 lbs.
4x10 Combo - 24"W x 25"H x 10"D, 55 lbs.
Head - 24"W x 10"H x 10"D, 30 lbs.
NEW MODEL! 4x10 Encore
Encore Chassis Only
Encore 1x12 Combo
Encore 2x10 Combo
Encore 1x15 Combo
Encore 4x10 Combo
Other Tolex and grill cloth options available at no extra charge
Champ, Vibro Champ, Super Reverb, Pro Reverb, Vibrolux Reverb, Princeton, Bassman, Vibrolux, Tremolux, Concert, and Bandmaster are all tradenames of Fender Musical Instruments. Allen Amplification is not associated with Fender Musical Instruments.