Allen Amplification does not export any of its products (except to Canada) at this time.
We can't provide the 50hz transformers required and are not able to provide the local support so often requested.
Our amps cannot be operated with step-down transformers due to the 50hz which will overheat them.
Thank you and best wishes.
22 watts (with 6V6 power tubes), 35 watts (with 6L6 power tubes), 40 watts with optional transformers and 6L6 power tubes.
(4) 12AX7, (2) 6V6GT or (2) 6L6GC, and (1) GZ34.
AB push-pull with adjustable fixed bias.
Bass, Middle, Treble and RAW controls plus BRIGHT switch.
All-tube driven, 3-spring medium delay Accutronics tank in padded Tuki reverb bag with shielded cables and TONE control.
Post-driver using dual potentiometer and (4) coupling capacitors.
Now featuring an 18-gauge non magnetic stainless-steel chassis with TIG welded corners.
Hand-wired point-to-point with tinned solid-core PVC wiring, G-10 glass epoxy circuit board with brass eyelets. Carbon film resistors, Mallory M150 and CDM silver mica tone capacitors, Switchcraft jacks, Carling switches, and high-quality molded type sockets.
Cool and quiet running Allen TP40D 180ma power transformer, TO35MT upgrade paper bobbin interleaved winding output transformer, TR reverb transformer and TC choke are all U.S. made. See the TRANSFORMERS page for details. Optional 40W transformer set features the TO40MT output transformer and larger TRCH choke (available for $25).
Design is loosely based on the blackface Fender Deluxe Reverb but without a normal channel or vibrato function. Design is enhanced with Bright switch, middle control, RAW control, Reverb TONE control, master volume, impedance switch, and bias measurement jacks.
Finger-jointed pine with black Tolex covering, black/white/silver sparkle grill cloth, Tolex covered rear screw-on panels, rubber-cushioned chrome glides (feet), black rubber (steel reinforced) carrying handle with chrome caps and screws.
Eminence Red, White and Blues 12" speaker, Eminence Legend 151 15", or (2) Eminence Copperheads 10".
Rear-panel bias measurement jacks, RAW mid/gain boost control, impedance switch, extension speaker jack, and TONE control for the reverb.
Size and Weight
1x12 Combo - 22"W x 18"H x 10"D, 42 lbs.
2x10 Combo - 22"W x 20"H x 10"D, 50 lbs.
1x15 Combo - 22"W x 20"H x 10"D, 49 lbs.
Head - 22"W x 10"H x 10"D, 30 lbs.
Accomplice Jr. Combo
NEW! - Accomplice Jr. Same power and features (less the reverb tone control and the impedance switch) in a smaller chassis. The 1x10 combo packs 35W in 35lbs with 6L6 power tubes.
6V6s may also be used for 22W. Eminence Copperhead 10" speaker and long Accutronics reverb tank for big amp tone. 1x10 combo or head. Also available in kit form.
Size and Weight
1x10 Combo - 20"W x 16"H x 9-1/4"D, 34 lbs.
1x12 Combo - 20"W x 18"H x 9-1/4"D, 38 lbs.
Head - 20"W x 9"H x 9-1/4"D, 25 lbs.
Accomplice Jr. Chassis Only
Accomplice Jr. Head
Accomplice Jr. 1x10 Combo
Accomplice Jr. 1x12 Combo
Accomplice Chassis Only
Accomplice 1x12 Combo
Accomplice 2x10 Combo
Accomplice 1x15 Combo
40 watt transformer set
Other Tolex and grill cloth options available at no extra charge
Champ, Vibro Champ, Super Reverb, Pro Reverb, Vibrolux Reverb, Princeton, Bassman, Vibrolux, Tremolux, Concert, and Bandmaster are all tradenames of Fender Musical Instruments. Allen Amplification is not associated with Fender Musical Instruments.